Monorail hoist from China manufacturer is a kind of light and small lifting equipment, which has the characteristics of small size, light weight, simple operation and convenient use. The installation of Monorail hoist from China manufacturer needs to be installed by professionals. The specific installation steps are as follows:
1. When the Monorail hoist from China manufacturer is packaged, the main engine and related components should be disassembled and placed. During installation, check whether there is any damage and reassemble. The reducer must be oiled before installation.
2. After the suspended electric trolley is assembled with the main engine, when it is installed on the I-beam track, it is necessary to ensure that there is a gap of 3-5 per force between the edge of the running wheel and the lower flange of the I-beam track, which can be passed through the washer on the bolt. make adjustments.

3. Check whether the plug for fixing the wire rope is securely installed.
4. After the Monorail hoist from China manufacturer is installed and connected to the power supply, raise the empty hook to the limit position to ensure that the distance between the highest point of the hook device and the drum shell is ≥F, adjust and tighten the upper limit stop block, and then lower the hook to the limit position to ensure that the roll There are 2-3 circles of steel wire rope left on the cylinder, adjust and tighten the lower stop block.
5. In order to ensure that the Monorail hoist from China manufacturer runs to both ends of the track without derailment or collision damage to the body, stop blocks should be set at both ends of the track, and a buffer device should be provided.
6. The two ends of the running I-beam track or the framework connected to it should be provided with a grounding wire, and the grounding circuit resistance at any point on the Monorail hoist from China manufacturer shall not be greater than 0.1Ω (the grounding wire can be made of 4-5mm2 bare copper wire or with a cross-section of not less than 25mm2 metal conductor).