The operation steps of the European type monorail hoist must be carried out in strict accordance with the instruction manual. Specific steps are as follows:
(1) Before starting the European type monorail hoist, please carefully check whether the mechanical, electrical, wire rope, hook and limiter of the equipment are in good condition and reliable.
(2) Do not overload the European type monorail hoist when lifting. During the lift, do not put your hands between the rope and the object. When lifting, strictly prevent hanging objects from touching the top.
(3) When lifting objects, the safety operation regulations of the forklift operator must be observed. The binding is firm, with cushioning at the sharp corners of the item.
(4) When the European type monorail hoist is started with an electrical switch, the insulation must be good. Press the button correctly and pay attention to your standing posture during operation.

(5) When the European type monorail hoist is at the corner of the track or near the end of the track, the speed must be slowed down.
(6) Do not use it frequently or repeatedly, otherwise it will cause the brake to heat up.
(7) The European type monorail hoist is not allowed to tilt and drag horizontally.
(8) It is forbidden to hang in the air for a long time to prevent deformation of parts.
(9) If a serious failure is found during use, the main power supply should be cut off immediately.
(10) After use, place the European type monorail hoist on the fixed point and lift it to more than 2 meters.
(11) Check frequently, remove faults or hidden dangers in time, and keep maintenance records.