The precautions in the operation of quality Electric wire rope hoist products are as follows:
1. The wire ropes on the reel should be arranged neatly. If overlapping and oblique winding are found, they should be stopped and rearranged. It is strictly forbidden to pull and step on the wire rope with your hands and feet during rotation. The wire rope is not allowed to run out, and at least three turns are kept on the reel.
2. If the wire rope is broken more than 10% within a pitch, it should be replaced.
3. When the quality Electric wire rope hoist products is in operation, no one is allowed to cross the wire rope. After the object is lifted, the operator must not leave the hoist, and the object or hanging cage should be lowered to the ground during rest.

4. In the operation of the quality Electric wire rope hoist products, one person is required to be responsible for the position of the circuit lifting point, the lifting position of the drum machine, and the position of the middle floor (two floors are an interval), and three people form a group to form a command and operating system. The person is equipped with a walkie-talkie and a flashlight, the command system personnel maintain good visibility with the hanging object, and a full-time person is responsible for the operation of the winch electrical control box. The driver and the commander cooperate closely and obey the unified command of the signal.
5. When the wire rope is wound, it must be wound by two people, one of whom operates and the other guides it five meters away.
6. If the quality Electric wire rope hoist products encounters a power outage during operation, cut off the power immediately.
The existence of the above precautions is to reduce unnecessary accidents in the process of operating the quality Electric wire rope hoist products.